geoserver 2.18.0 跨域

admingeoserver 2.18.0 跨域已关闭评论条评论 69 次浏览


一、去geoserve的lib目录下 geoserver\lib找jetty-servlets-XX.jar , jetty-util-xx.jar(xx表示不同的版本)两个jar包;


二、把两个jar包拷贝到geoserver\webapps\geoserver\WEB-INF\lib\目录下;


三、去geoserver\webapps\geoserver\WEB-INF目录下找web.xml,进行如下修改:

  • 把下面内容的注释去掉,大概在170行左右
复制代码
<!-- Uncomment following filter to enable CORS in Jetty. Do not forget the second config block further down.
    <filter>
      <filter-name>cross-origin</filter-name>
      <filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
      <init-param>
        <param-name>chainPreflight</param-name>
        <param-value>false</param-value>
      </init-param>
      <init-param>
        <param-name>allowedOrigins</param-name>
        <param-value>*</param-value>
      </init-param>
      <init-param>
        <param-name>allowedMethods</param-name>
        <param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
      </init-param>
      <init-param>
        <param-name>allowedHeaders</param-name>
        <param-value>*</param-value>
      </init-param>
    </filter>
    -->
复制代码
  • 在其后添加以下数据
复制代码
<filter>
        <filter-name>cross-origin</filter-name>
        <filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
        <init-param>
            <param-name>allowedOrigins</param-name>
            <param-value>*</param-value>
        </init-param>
        <init-param>
            <param-name>allowedMethods</param-name>
            <param-value>GET,POST</param-value>
        </init-param>
        <init-param>
            <param-name>allowedHeaders</param-name>
            <param-value>x-requested-with,content-type</param-value>
        </init-param>
    </filter>
复制代码
  • 去找<filter-mapping>的平级标签,加上以下内容:
<filter-mapping>
    <filter-name>cross-origin</filter-name> 
    <url-pattern>/*</url-pattern> 
</filter-mapping>
  • 重启geoserver即可


四、完整版web.xml

复制代码
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
    <display-name>GeoServer</display-name>
  
      <context-param>
    <param-name>serviceStrategy</param-name>
    <!-- Meaning of the different values :
         
         PARTIAL-BUFFER2
         - Partially buffers the first xKb to disk. Once that has buffered, the the 
           result is streamed to the user. This will allow for most errors to be caught
           early. 
           
         BUFFER
         - stores the entire response in memory first, before sending it off to
           the user (may run out of memory)

         SPEED
         - outputs directly to the response (and cannot recover in the case of an
           error)

         FILE
         - outputs to the local filesystem first, before sending it off to the user
      -->
    <param-value>PARTIAL-BUFFER2</param-value>
  </context-param>
  
  <context-param>
    <!-- see comments on the PARTIAL-BUFFER strategy -->
    <!-- this sets the size of the buffer.  default is "50" = 50kb -->

    <param-name>PARTIAL_BUFFER_STRATEGY_SIZE</param-name>
    <param-value>50</param-value>
  </context-param>
  
  <!--Can be true or false (defaults to: false). -->
  <!--When true the JSONP (text/javascript) output format is enabled -->
  <!--
  <context-param>
    <param-name>ENABLE_JSONP</param-name>
    <param-value>true</param-value>
  </context-param>
  -->
    <!-- 
    <context-param>
      <param-name>PROXY_BASE_URL</param-name>
      <param-value>http://82.58.146.45/geoserver</param-value>
    </context-param>
     -->
   
     <!--
    <context-param>
       <param-name>GEOSERVER_DATA_DIR</param-name>
        <param-value>C:\eclipse\workspace\geoserver_trunk\cite\confCiteWFSPostGIS</param-value>
    </context-param> 
   -->
    
    <!-- pick up all spring application contexts -->
    <context-param>
        <param-name>contextConfigLocation</param-name>
        <param-value>classpath*:/applicationContext.xml classpath*:/applicationSecurityContext.xml</param-value>
    </context-param>
    
    <filter>
     <filter-name>FlushSafeFilter</filter-name>
     <filter-class>org.geoserver.filters.FlushSafeFilter</filter-class>
    </filter>
     
    <filter>
      <filter-name>Set Character Encoding</filter-name>
      <filter-class>org.springframework.web.filter.CharacterEncodingFilter</filter-class>
      <init-param>
        <param-name>encoding</param-name>
        <param-value>UTF-8</param-value>
      </init-param>
    </filter>

    <filter>
     <filter-name>SessionDebugger</filter-name>
     <filter-class>org.geoserver.filters.SessionDebugFilter</filter-class>
    </filter>

    <filter>
    <filter-name>filterChainProxy</filter-name>     
     <filter-class> org.springframework.web.filter.DelegatingFilterProxy</filter-class>
    </filter>

    <filter>
      <filter-name>xFrameOptionsFilter</filter-name>
      <filter-class>org.geoserver.filters.XFrameOptionsFilter</filter-class>
    </filter>

   <filter>
     <filter-name>GZIP Compression Filter</filter-name>
     <filter-class>org.geoserver.filters.GZIPFilter</filter-class>
     <init-param>
         <!-- The compressed-types parameter is a comma-separated list of regular expressions.
              If a mime type matches any of the regular expressions then it will be compressed.
              -->
         <param-name>compressed-types</param-name>
         <param-value>text/.*,.*xml.*,application/json,application/x-javascript</param-value>
     </init-param>
   </filter>

   <filter>
     <filter-name>Request Logging Filter</filter-name>
     <filter-class>org.geoserver.filters.LoggingFilter</filter-class>
     <init-param>
         <!-- The 'enabled' parameter is a boolean value, "true" (case-insensitive) for true or
              any other value for false.  If enabled, then the logging will be performed;
              otherwise the logging filter will have no effect.  If not specified, this 
              parameter defaults to false.
              -->
         <param-name>enabled</param-name>
         <param-value>false</param-value>
     </init-param>
     <init-param>
         <!-- The 'log-request-headers' parameter is a boolean value, "true" (case-insensitive) for
              true or any other value for false.  If enabled, then the logging will include the HTTP 
              headers of requests.  If not specified, this parameter defaults to false.
              -->
         <param-name>log-request-headers</param-name>
         <param-value>false</param-value>
     </init-param>  
     <init-param>
     <!-- The 'log-request-bodies' parameter is a boolean value, "true" (case-insensitive) for
          true or any other value for false.  If enabled, then the logging will include the body
          of POST and PUT requests.  If not specified, this parameter defaults to false.
          Note that this may noticeably degrade responsiveness of your geoserver since it will
          not begin to process requests until the entire request body has been received by the 
          server.
          -->
     <param-name>log-request-bodies</param-name>
     <param-value>false</param-value>
     </init-param>
   </filter>
   
   <filter>
     <filter-name>Advanced Dispatch Filter</filter-name>
     <filter-class>org.geoserver.platform.AdvancedDispatchFilter</filter-class>
     <!-- 
     This filter allows for a single mapping to the spring dispatcher. However using /* as a mapping
     in a servlet mapping causes the servlet path to be "/" of the request. This causes problems with
     library like wicket and restlet. So this filter fakes the servlet path by assuming the first 
     component of the path is the mapped path. 
     -->
   </filter>
   
   <filter>
    <filter-name>Spring Delegating Filter</filter-name>
    <filter-class>org.geoserver.filters.SpringDelegatingFilter</filter-class>
    <!--
    This filter allows for filters to be loaded via spring rather than 
    registered here in web.xml.  One thing to note is that for such filters 
    init() is not called. INstead any initialization is performed via spring 
    ioc.
    -->
   </filter>
   
   <filter>
     <filter-name>Thread locals cleanup filter</filter-name>
     <filter-class>org.geoserver.filters.ThreadLocalsCleanupFilter</filter-class>
     <!-- 
     This filter cleans up thread locals Geotools is setting up for concurrency and performance
     reasons 
     -->
   </filter>

   <!-- Uncomment following filter to enable CORS in Jetty. Do not forget the second config block further down.-->
    <filter>
      <filter-name>cross-origin</filter-name>
      <filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
      <init-param>
        <param-name>chainPreflight</param-name>
        <param-value>false</param-value>
      </init-param>
      <init-param>
        <param-name>allowedOrigins</param-name>
        <param-value>*</param-value>
      </init-param>
      <init-param>
        <param-name>allowedMethods</param-name>
        <param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
      </init-param>
      <init-param>
        <param-name>allowedHeaders</param-name>
        <param-value>*</param-value>
      </init-param>
    </filter>
    
    <filter>
        <filter-name>cross-origin</filter-name>
        <filter-class>org.eclipse.jetty.servlets.CrossOriginFilter</filter-class>
        <init-param>
            <param-name>allowedOrigins</param-name>
            <param-value>*</param-value>
        </init-param>
        <init-param>
            <param-name>allowedMethods</param-name>
            <param-value>GET,POST</param-value>
        </init-param>
        <init-param>
            <param-name>allowedHeaders</param-name>
            <param-value>x-requested-with,content-type</param-value>
        </init-param>
    </filter>
    
    
   <!-- Uncomment following filter to enable CORS in Tomcat. Do not forget the second config block further down.
    <filter>
      <filter-name>cross-origin</filter-name>
      <filter-class>org.apache.catalina.filters.CorsFilter</filter-class>
      <init-param>
        <param-name>cors.allowed.origins</param-name>
        <param-value>*</param-value>
      </init-param>
      <init-param>
        <param-name>cors.allowed.methods</param-name>
        <param-value>GET,POST,PUT,DELETE,HEAD,OPTIONS</param-value>
      </init-param>
      <init-param>
        <param-name>cors.allowed.headers</param-name>
        <param-value>*</param-value>
      </init-param>
    </filter>
    -->

    <!-- 
      THIS FILTER MAPPING MUST BE THE FIRST ONE, otherwise we end up with ruined chars in the input from the GUI
      See the "Note" in the Tomcat character encoding guide:
      http://wiki.apache.org/tomcat/FAQ/CharacterEncoding
    -->
    <filter-mapping>
      <filter-name>Set Character Encoding</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <filter-mapping>
        <filter-name>cross-origin</filter-name> 
        <url-pattern>/*</url-pattern> 
    </filter-mapping>
   
   
    <filter-mapping>
      <filter-name>FlushSafeFilter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <filter-mapping>
      <filter-name>SessionDebugger</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>

    <filter-mapping>
      <filter-name>GZIP Compression Filter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>

    <filter-mapping>
      <filter-name>xFrameOptionsFilter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <filter-mapping>
      <filter-name>Request Logging Filter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
   
    <!-- 
      If you want to use your security system comment out this one too
    -->
    <filter-mapping>
      <filter-name>filterChainProxy</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <filter-mapping>
      <filter-name>Advanced Dispatch Filter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>

    <filter-mapping>
      <filter-name>Spring Delegating Filter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <filter-mapping>
      <filter-name>Thread locals cleanup filter</filter-name>
      <url-pattern>/*</url-pattern>
    </filter-mapping>
    
    <!-- general initializer, should be first thing to execute -->
    <listener>
      <listener-class>org.geoserver.GeoserverInitStartupListener</listener-class>
    </listener>
    
    <!-- logging initializer, should execute before spring context startup -->
    <listener>
      <listener-class>org.geoserver.logging.LoggingStartupContextListener</listener-class>
    </listener>
  
    <!--  spring context loader -->
    <listener>
      <listener-class>org.geoserver.platform.GeoServerContextLoaderListener</listener-class>
    </listener>
    
    <!--  http session listener proxy -->
    <listener>
      <listener-class>org.geoserver.platform.GeoServerHttpSessionListenerProxy</listener-class>
    </listener>

    <!-- request context listener for session-scoped beans -->
    <listener>
        <listener-class>org.springframework.web.context.request.RequestContextListener</listener-class>
    </listener>
    
    <!-- spring dispatcher servlet, dispatches all incoming requests -->
    <servlet>
      <servlet-name>dispatcher</servlet-name>
      <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
    </servlet>
    
    <!-- single mapping to spring, this only works properly if the advanced dispatch filter is 
         active -->
    <servlet-mapping>
        <servlet-name>dispatcher</servlet-name>
        <url-pattern>/*</url-pattern>
    </servlet-mapping>
    
    <mime-mapping>
      <extension>xsl</extension>
      <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
      <extension>sld</extension>
      <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
      <extension>json</extension>
      <mime-type>application/json</mime-type>
    </mime-mapping>
  
    <welcome-file-list>
        <welcome-file>index.html</welcome-file>
    </welcome-file-list>
    
</web-app>
复制代码